90 Degree Glass Clamps
Cast stainless steel 90 degree glass clamps, 90 degree glass clamps are used in a combination with wall and glass, easy fixture and beautiful. They are produced by investment casting, then do dull polishing or mirror polishing. Surface treatment will be according to our customer’s requirement. Usually, we only provide raw castings, certainly, we also can deliver finished part(Include machining, polishing and assembly).
Cast stainless steel 90 degree glass clamps
Investment casting, precision casting, lost wax casting
VDGP690-D2 class from Germany standard
Dull polishing or mirror polishing
Ra1.6-6.3 for casting surface
304, 316, 1.4308 or 1.4408
Finished part or raw casting
---Cast stainless steel 90 degree glass clamps, 90 degree glass clamps are used in a combination with wall and glass, easy fixture and beautiful. They are produced by investment casting, then do dull polishing or mirror polishing, and the surface treatment will follow to our customer’s requirement. Usually, we only provide raw castings, we also can deliver finished part, which includes machining, polishing and assembly.
---They are designed to provide a mechanical fastener to cover the shear forces placed on the glass panels. No special fabrication of the glass is required. Can also be used to secure the glass panels in position while the applied silicone sealant in the joint cures.
---Clamps are secured in place by nylon tipped allen set screws, and completing with washers that supplied in satin stainless steel. Thanks to the design compatibility, they are suitable for indoor and outdoor use, a perfect solution for glass balustrades, partitions, railings, windbreaks, displays and sneeze guards.
--- Because stainless steel requires careful maintenance and protection, we also recommend ordering protection spray to prevent surface discolouration. With the attractive leveled edges, it is used to connect two fixed glass panels meeting at 90 degree angle.
---Additionally, it is easy and convenienttly to install, no need to drill a hole. Please allow 1-3mm error,due to it is manual measurement
---Most importantly, both OEM & ODM services are available. Our factory has raw material and accessories fitting stock, and before shipping there are strict inspection personnel and process for final quality checking.